My new treasure!

So, I'm at the thrift store yesterday, and was just about to call it quits. I'd found a couple closet rods, and grabbed a couple of forks and spoons (our new house has a bigger dishwasher, and I'm finding we are running out before the dishwasher is full...). I also found a sweet little vase that works perfectly with my "orange" stuff, and Katie found a cute sun hat she had to have. They were all things I needed, but I didn't feel like it was an awesome thrifting experience. On my way out, I noticed a couple big things in the furniture section were being taken to the back...and experience shows that if you wait just a few minutes, they will bring out *something* to fill the empty spot...so I stood right there in case it was awesome and there would be a race for it....after a minute, the nice man showed up with...



Cool, hu?! I was right there, so I was looking at it first, but there were three other people hovering over my shoulder, so as soon as I was sure it was in good condition I grabbed it! I have NO IDEA what I'm going to do with it, but it is beautiful and it awesome condition. the top could use a light sand and maybe a finish...but I like it the way it is, too... I was thinking it would be cool laid flat and used for my computer desk...and it's totally stable enough for that, but Chris thinks it wouldn't work because of the legs and not being able to really get a chair under it. I may insist on it anyway :)

All Mine!

Isn't it a beautiful sight?! This is ALL MINE!!! Ok, well, the orange car and one corner of the garage is Chris'. He needs somewhere for the snow tires to sit...but the rest of it...ALL MINE!!! HAHAHAHA (that was my best over-the-internet evil laugh) The one side with the large door is now full of furniture waiting to be turned into awesome (as well as several boxes needing to be unpacked...), and the other side (with the two doors) is being set up as a workshop (as well as holding a good sized pile of boxes waiting to be unpacked)...The astro van? MINE! And TOTALLY AWESOME!!! Ok, part of it may be that we'd been sharing the orange car for so long, that any car would seem awesome for me to be able to go run errands whenever...but that thing will also haul a TON of stuff! Right now, it's loaded with lumber for my new farm table...including a 12 foot 1x4. I know, you are all totally jealous!

Ok, so now, do I unpack boxes to make room in the workshop, or unload the lumber, or start getting dinner ready? Oh, it's so hard to decide!

Exciting stuff going on

This is one pile of "in progress" projects that are sitting in the middle (yes, precisely in the middle) of my living room. I'm very excited about all of them, so I'll tell you a bit about them.

The blue frame is the frame from this post. Not nearly as boring now, hu? I'm wanting to add some trim to the back so it sits away from the wall and the chicken wire doesn't scratch paint. I'm also not sure how this color will look with our new walls, so the color may change. I'm going to do some fun clothes pins and use it for my idea board.

Notice the white cushion? I have two dining chairs...one painted the same blue as the frame, the other will probably be red...and I have to get to the fabric store to find the perfect print to reupholster the cushions with. (I have before pics, so when they get done, you'll get to see it all)

The other frame is one my sister-in-law picked up and decided she wouldn't be using. It's a really beautiful frame...not sure what *I'm* going to do with it...but I'll think of something :) On top of the desk are pieces of an ottoman (the puffy pink thing is a tutu) that could be put together if I ever got it painted (yeah, check this post again to see where it started)...yes, one of the legs is still waiting to be sanded... On the floor, you see those turned legs??? They are dining table sized and I got all 4 for $15 at the Restore this week! (just for fun, do a search for turned dining table legs...yeah, $15 is an AMAZING deal!) I plan to build the rest of the table to go with them...

The orange chair is one we use, but I plan to reupholster it as soon as I learn how. It was my grandma's...we were at her house once and she'd been purging some of her stuff...I told her that if she ever wanted to get rid of that chair, I'd love to have it...not only is it a great chair with nice lines...it's totally comfy...perfect for curling up and reading a book.

Projects that you don't see...well, my desk is still waiting to be painted. I have a full sized and a toddler headboard in the back, and I'm still planning my new farm table.

So, why are ALL of these sitting only half done or hardly started? Well, because with one car that my husband takes to work, it's been hard to get out and get the supplies I need. Also, I can't paint when it's snowing and raining and the wind is blowing...which it's been doing a lot here lately. This leads to some other exciting stuff going on that is actually related to all of these things. First, I got an astro van!!! It's not pretty or new, but it runs well and I can haul a TON of stuff in it. Plus, I can actually run the errands I need to get supplies to finish my projects! Exciting!!! Next extra exciting thing! We have found a new house to rent. We are on a tight budget, so I was hoping for a single car garage to work in during bad weather, but we've been blessed to find a great place with a 3 car garage already set up with a work bench and lots of storage! I'll have plenty of room for even the biggest projects there! It also has a basement where I can have a corner to put my sewing and craft stuff.

I'm ultra excited about all of this. We're going to be moving this week...I'm doing the littler stuff during the week (thanks to my awesome new van!), and we hope to do the big stuff Saturday, so by next week (If I can wait that long) I should be seeing some of these projects wrapped up. I'm so excited to show you what it will all look like in the end!

Feeling a little frustrated....

So, my awesome table that I get giddy at the very thought of...is on hold :( We were waiting to get the suburban fixed so we could get the lumber for it...turns out the suburban would cost about twice as much to fix as it's worth...so now we are on hold waiting to figure out what we are going to do for a second vehicle...it has to be something I can haul kids and furniture with. In the midst of this, we are looking for a new place to rent...something with a garage where I can work on all my projects. So, the spot I was going to put my perfectly pretty new farm table won't be my spot to put something, so I'm kinda waiting to find out what my new spot will look like before I build so I can build something the right size for that spot.

So, I'm feeling frustrated and like my projects have all been put on hold while I find a house and shop for a ... truck probably? So I will try to post some cool stuff...I do have a couple things I'm slowly working on...but please don't give up on me if you don't see much from me for the next while. When I get a garage/workshop I have all kinds of awesome that will be happening :)

Because my husband is sick of listening to me ramble about it...

and this is my blog, so you can't stop me from rambling if I want to :p Plus, I'd love to hear if any of my readers actually have any insight on my ramblings....

Ok, My last post mentioned that I'm going to be building a new table. I linked to these plans from Knock off Wood. I absolutely LOVE this site! Her plans are so simple to follow and there are so many examples of what other people have done using these plans. This one is a fairly new plan and I haven't seen a picture of it yet. The pictures she put in that post are random farmhouse pictures...which are ALL awesome! Then she linked to this post with some more pictures of tables and I ABSOLUTELY ADORE this one. (swoon with me now!)

(originally found on this site)

I adore the chunky legs (would you say those are 4x6? I would...), and the color and distressing is perfect. I also really like the lower supports and stretcher. My husband is discouraging any lower supports or stretcher because...well, he's tall and doesn't want anyone to have to deal with them when they have to sit on the ends. Also, I'm not sure how to support the overhang outside of the apron, so I dont' want that much space between the legs and the end of the table. Both of us like the look of a table without the breadboard on the ends. Those are the boards that run the width of the table on the ends. (the above table *has* breadboards...this next one does not...)

(from Scandinavian Retreat)

See...boards that are cut square at the ends...we both like this look better. But I feel this table looks a little fragile. The legs are too thin....and I want something that really *looks* like it will take the test of time.

Ok next up....

(Restoration Hardware)

Knock off Wood has plans for this table on her site (here). Her plans for this one are really very good too... again, my husband veto'ed the lower supports, and there's the breadboard again...However, looking at this picture of the RH table we both oooohh'ed at the heft of the table top...go back and check out how THICK those boards are! And nice and wide, too! Plus the nice thick table legs....but we're not sure how they will do support wise without the lower supports using the plans she has here...hmmm....(also...reclaimed wood! look at that color...swooning again!)

So, with all these thoughts in mind, I was browsing older posts on Knock off Wood and came to this "how-to" post...She has a couple videos of how she does the legs on the Hyde tables. That "double apron" (that's what I'm calling it anyway) thing she does really looks like it would give a lot of stability to the legs, don't ya think? I do! But the only plans for Hyde tables are coffee table, end table and console table...still....

So, with the help of my husband I've found the solution! We are using the directions for the Hyde legs/apron and sizing it to fit our table(no lower supports and nice thick legs). We're using the top like the narrow farmhouse table so we don't have breadboards, but using 2x8 boards for the top instead of 1x8's like she has in her plan (nice hefty top to go with the nice hefty legs!). The top is going to be 36 in wide (or close to that...it will be 5 boards wide...) and 6.5 feet long. This will easily put 3 chairs on the side of the table with options for people on the end. And it fits perfectly where I want it. Woot! I know how to build it now!

Next up...the finish...I was watching some tutorials because I've read all kinds of techniques for this, but I was wanting to see the results with my table in mind. There was one where she stained...put the stain on then wiped it right off, kind of making it uneven in places. The she let it dry, then distressed with a chisel and sander, then she used a black glaze, wiping it off after just a few seconds (oh, here it is...but she is REALLY annoying to watch, so I'm just linking to the last one that shows the results after the glazing. She does some more paint steps, but I'd stop after the first glaze)....I *think* if I use a stain that is gold-ish (but NOT orangy!) then black glaze, I'd get a look a lot like the James Merrell table. I'd also add in some deeper cuts in the legs and maybe some other steps to beat it up while distressing. Then finish with a satin clear coat...Glossy seems to feel out of place for this, but I think satin would give it a nice sheen that's not too much while protecting it from all the spills my little girls are going to inflict on it.

So, are you as excited for me to actually start this project as I am? I'd totally be doing it right now...if I had a way to get the boards home. My tools have shipped, and if they get here before my suburban is fixed, then I'm going to call my cousin with a truck and have her help me get them here :)

Did any of you even get though that ramble? lol...I know, it's a lot, but that has been what's on my mind, and I can't seem to concentrate on anything else!

Lookie what is on it's way!!!

For a long time I've been aware that we are outgrowing out table. There is room for 4 comfortably if I dish up plates from the stove and we can squeeze in one extra person when we need to...but I love the feel of a family meal where all the food is piled in dishes on the table, and being able to invite people over would be so nice. We just don't have room for that, and Katie will be joining us at the table (instead of in her high chair next to the table) soon. So, I've been watching DI (thrift store) for a new table...they range from $40-$80 there generally, but I've only ever spotted one I even kind of liked...and it was on a day I didn't have cash for a table. And I didn't like it *that* well. So I've just been living with our too-small table until I could think of a solution that would fix the problem and not break our budget. Well, I think I've found one and I just ordered part of the solution!

Awesome, hu?! I'm so excited! And in case you are wondering, I totally did not buy these for my husband for our anniversary. These babies are MINE...though he did help me pick out the best ones for my budget, and I'm letting him think he will have access to use them if he needs (teehee). (doesn't look much like a table does it???) Well, HERE are the plans for the table that will be mine once the weather is stable enough to let me work on it outside. Isn't it pretty? We're going to alter the plans a bit...hers is 30inches wide and 8 feet long...a little longer then I have room for, and not quite wide enough for dishes of food. Mine is going to be about 37 inches wide and 6.5 feet long. Aren't you excited for me???

And until then, these new tools will be a big help with stuff like....
You remember this pretty little thing? Well, it is now all prepared and ready and waiting for those new tools to show up. (ok, I PROMISE one of these days I'll actually get an "after picture of something up, instead of just teasing you :p)

Next up on my wish-list (because it will make building the new table 100% easier!)...A nail gun! The miter saw is going to have to wait to see if I'm using the other stuff enough to justify it...but, oh, do I want one!

Pretty in Pink!

Remember this?...

Typical computer tower...big...black...

In our house, we don't have computers hidden away in private rooms...heck we don't even have places to tuck them away (you saw my living room, right?) Computers are a big part of our life and therefore, right out in the open. I figured I could make this little guy a little more interesting, so here it is now...

Cute, right??? More work then I figured, and I cut a lot of corners...I should have sanded initially and taped off better and done a clear coat at the end. I have more plans, so the clear coat may get done then, but we'll see. Initially, I was going to try to make it look like a dresser or chest with wood moulding and little decorative handles...but the shape of the case isn't really boxy enough for that, but I think I'm going to add at least a little something more at some point. For now...I shall call her "Bubbles" lol :) And just think how pretty she will look sitting next to my pretty new desk once it's painted black! Oh, spring, you can't come soon enough!

*note! this project was able to be done because it was a new case with no computer components installed and I had my husband who is fairly knowledgeable about computers help me. I would not recommend taking your tower out and spray painting it w/o talking to someone who knows about computers....I dismantled the whole case to do this. I'll post more pictures tomorrow when I get them transferred from my old computer so you can see how I did it.